Connect with us


What is a furnace and their application





In many homes, the  furnace is the heart of the heating system. Most often, a heat pump is associated with a heating and hot water heating system. It may not always be the only solution, sometimes it is combined with a device such as a furnace to ensure the most effective operation of the central heating system. Sometimes it also happens that a furnace turns out to be a better investment than a heat pump.

Often in newly built single-family housing estates, large furnace rooms are created that distribute gas to individual buildings. The raw material, which is gas, is relatively cheap, so heating your home with gas will not burden your wallet too much. However, many people wonder where to install a furnace in their home before installing it?

When modernizing or redesigning the entire heating system, it is worth carefully analyzing your needs and those of all household members to freely choose the right solution.

Where to place?

In addition to the obvious issue, i.e. the functionality of the furnace, its location is also very important. The furnace can be positioned in such a way that it blends in with the decor of the house and is not so noticeable. Over time, aesthetic values ​​became as important as functionality. So where can furnace be placed? 

There are several possibilities:

  • in the attic;
  • in a utility room;
  • in a drying room/laundry room;
  • in a vestibule or hall;
  • in the bathroom;
  • in the kitchen.

What are furnace? 

Furnaces are devices used for heating households and heating domestic hot water, with natural gas as the fuel. However, the furnace is not equal to the furnace. There are two types of furnaces:

See also  A Guide to Finding the Best Hotels in the USA


  • single-function – it does not have a heat exchanger that heats hot utility water. It is not able to prepare water on its own, which you will later use during the bath. These types of furnaces are usually connected to a capacity heater, i.e. a storage tank (tank) with a built-in heat exchanger.
  • combi – the advantage of the device is the fact that it already has a built-in flow heater. The device heats water in a flow way. The whole process begins when the hot water tap is turned on. Models with a built-in hot water tank are more practical because they shorten the waiting time for hot water after turning on the tap. However, it should be remembered that more convenient solutions are always slightly more expensive than the basic ones.


Home heating – basic information

Regardless of what solution you choose – condensing furnaces, combi or single-function furnaces – you have a very important task ahead of you. Before choosing any device, you should calculate the energy needs of your home. This will allow you to estimate the amount of energy that a given device needs for proper operation. When choosing furnaces, it is worth paying special attention to the so-called. heating power modulation range.

The higher the range, the better the stove will adapt to the heat demand. This will preserve the continuity of operation, because the stove will turn on less often, and therefore it will use less fuel. In one sentence: a huge plus, maintaining the right temperature in the house, hot water with minimal use of gas.

See also  Things You Might Not Know About The Windy City

When building a house or changing the heating from the current one to gas, it is very important to take care of every aspect of the installation’s operation. The scope of duties imposed on the designer of such a solution is similar, regardless of whether it is a wall-hung, floor-standing, single-function or double-function repair, with an open or closed chamber:


  • selection of the appropriate device (power and efficiency) based on calculations of heat demand;
  • ensuring proper flue gas discharge and ventilation;
  • designing the solution in such a way that it is the most aesthetic (e.g. a hanging furnace in the kitchen hidden in a cupboard);
  •  price adequate to the type of furnace.


Furnace repair in Toronto and Barrie

Now you know how a furnace is designed and how it works, its types and benefits. All that’s left to do is to decide on a company to help you do it.

One such company is North Wind Heating and Air Conditioning, a top company that professionally installs furnaces in Toronto and Barrie. It specializes in residential furnace installation and maintenance, and has been for quite some time.

The company’s advantages are:

  1. Professionalism.
  2. Execution of orders in a short time.
  3. 10 years parts guarantee, 2 years labor guarantee.

Company specialists can come to you in the following cities: Mississauga, Etobicoke, York, North York, Scarborough, Markham, Vaughan, Richmond Hill, Brampton, Toronto, Bolton, Orangeville, Mono, Shelburne, New Tecumseth, Collingwood, Innisfil, Barrie, Midland.

Want to buy new furnace? Follow this link, get all the information you need from the North Wind Heating and Air Conditioning experts and have this equipment installed soon.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *





Amazing Facts